Review Author
Frank Landrus
Published on
December 22, 2015
Company
Aerobonus
Scale
1/48
MSRP
$12.00

A perfect addition to your diorama is this Aires Aerobonus US Army Load set. Aires Aerobonus provides you with two resin pieces, perfect for a load in the back of a 1/48 scale 2-1/2 ton truck or a 1/48 cargo aircraft. The first piece consists of 12 sacks strapped to a wooden skid with the second piece consisting of four crates strapped to a wooden skid. Of note is the re-sealable packaging that Quickboost uses that makes the parts easy to review and then stuff back into the package securely.

Aires Aerobonus has molded the parts in light grey resin with no discernable bubbles. There are no mold seams to sand off and the resin plug is easily removed from the bottom with a razor saw or Dremel.

Although most paints will adhere to resin alone, I would recommend that you wash the parts to remove any remaining mold release and prime them first. I painted the sacks and the crates with Vallejo acrylic paints.

Highly recommended.

Review Author
David Horn
Published on
December 22, 2015
Company
Trumpeter
Scale
1/35
MSRP
$109.95

Aircraft and History

The HH-65C used by the US Coast Guard (USCG) is derived from the civilian Eurocopter AS365 Dauphin. The USCG selected this helicopter in 1979 and entered service in 1985.as a short range recovery Air-sear rescue helicopter. A total of 102 aircraft were manufactured and are still in service today. One distinctive feature of this aircraft is a “Fenestron” ducted fan anti-torque tail. This design improves safety for crews and the airframe itself from tail rotor strikes. The HH-65C carries a crew of 4 which consist of a pilot, copilot, flight mechanic and rescue swimmer. In addition to search and rescue, the aircraft tis also used for homeland security patrols, cargo/drug interdiction, ice breaking and pollution control.

Review Author
Frank Landrus
Published on
December 22, 2015
Company
Eduard
Scale
1/48
MSRP
$30.00

Background

The Polikarpov I-16 was a Soviet fighter aircraft of revolutionary design; it was the world's first low-wing cantilever monoplane fighter with retractable landing gear to have attained operational status, and as such "introduced a new vogue in fighter design." The I-16 was introduced in the mid-1930s and formed the backbone of the Soviet Air Force at the beginning of World War II. The diminutive fighter, nicknamed "Ishak" or "Ishachok" ("Donkey" or "Burro") by Soviet pilots, prominently featured in the Second Sino-Japanese War, the Battle of Khalkhin Gol, and the Spanish Civil War. The Type 24 replaced the skid with a tailwheel, and featured the much more powerful 670 kW (900 hp) Shvetsov M-63 engine. The Type 24 also featured four ShKAS guns, proper landing flaps replaced the drooping ailerons, and a second cockpit door was added on the starboard side.

Review Author
Allan Murrell
Published on
December 22, 2015
Company
Airfix
Scale
1/72
MSRP
$29.99

Airfix has created a smashing new Heinkel 111 P2 kit, and this one is well worth getting if you like the HE111. The detail and high quality of this product is fantastic.

In the box:

  • 5 x light grey sprues
  • 1 clear sprue
  • 1 decal sheet
  • 1 instruction booklet

All the sprues are well molded with no flash at all.

The detail is very fine and crisp. The panel lines on the He111 P-2 are all very well defined.

Construction

First based on the order in the instruction booklet, we start on the interior of the fuselage, which like the cockpit on this kit is extremely well-detailed for a 1/72 kit. In fact the amount of detail is better that a lot of 1/48 kits I have built.

The fuselage halves are joined, and then we start in the bomb racks and wing center section.

There is a little filling to do when you bring the center wing section and the fuselage together, but not much.

Review Author
Jim Pearsall
Published on
December 21, 2015
Company
Scale Aircraft Conversions
Scale
1/144
MSRP
$5.95

This is another of SAC’s marvelous landing gear replacements for 1/144 scale aircraft. One of the worst things to fix on a finished aircraft is the broken landing gear which occurs from either a move or less than careful handling, usually by a friend of spouse. I was at a display when a spectator started to pick up one of Brian Baker’s planes. I tried to stop him, but he said “I know what I’m doing!!” and then proceeded to remove the antenna, landing gear and rigging in one grab.

The Kit

You get two sets of nicely cast metal gear legs. This is cool, because Eduard has two Spitfires in their 1/144 kits. Well, there IS a single kit, but I haven’t seen that one yet.

I show in the photos below that the SAC parts match the Eduard parts pretty closely. In 1/144, it’d be hard to say exactly. Even with a magnifier, I’m not that good.