Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Floyd S. Werner Jr.
Published on
December 1, 2010
Company
Eagle Editions Ltd.
Scale
1/32
MSRP
$17.50

Eagle Editions is synonymous with Luftwaffe research designed for the model builder. Their latest release is for any 1/32nd scale Friedrich. As always with EagleCals, the quality is felt right from opening up the packaging.

You are presented with markings for four Freidrichs. These are quite colorful aircraft. All of them start out with base colors of RLM 78/79, but that is where they commonality ends.

The instructions are printed in color on four 8x10 pages. The front page contains the profile and plan views. The profile views are printed larger on the second page. These profiles are absolutely beautiful. I don’t know for sure but I’m fairly certain they are done by Tom Tullis. The third page is a written description of each aircraft. The fourth page contains the stencil diagram.

Review Author
Tim Hortman
Published on
November 29, 2010
Company
Quickboost
Scale
1/48
MSRP
$7.50

The folks at Quickboost continue to add superb detail sets to their growing catalog of items. For this review I will be looking at the Undercarriage Covers detail set for the 1/48 Hasegawa Ki-61 family of kits.


This superb detail set is designed to work with the 1/48 Hasegawa Ki-61 I Hein “Tony”. The Hein was a WWII Japanese fighter with an inline engine. When Allied pilots first encountered the Hein, they thought they were flying against German Bf 109 fighters because of the similar nose shape. They quickly discovered that this was in fact a Japanese design, and it was given the code name “Tony”.


The Quickboost Undercarriage Covers (Landing gear doors) are finely molded, and are very easily removed from the casting block. I find that using a razor saw is the easiest method, and after a little sanding, these great detail parts are ready to glue in place.

Review Author
Tim Hortman
Published on
November 29, 2010
Company
Quickboost
Scale
1/48
MSRP
$6.50

The folks at Quickboost continue to add superb detail sets to their growing catalog of items. For this review I will be looking at two sets for the 1/48 Hasegawa Ki-43-II Hayabusa “Oscar” Japanese WWII Fighter.


Both sets are designed to fit any number of the Hasegawa kits, as every boxing of the Hayabusa share the same fuselage – either set will work for Hasegawa’s entire series of Ki-43 aircraft.


Before you run out and purchase one of these sets, check your reference material to decide if you would like to build an early model Ki-43-II or a Late model Ki-43-II. Quickboost set 48-295 is labeled “Type A” and represents the later style exhaust pipes (pointing toward the tail). Set 48-294 is labeled “Type B” and is for the early models with the exhaust stack pointing outward. For this review, the kit shown is a Ki-43-II Early type with the exhaust stack pointing outward.

Review Author
Tim Hortman
Published on
November 29, 2010
Company
Quickboost
Scale
1/48
MSRP
$6.50

The folks at Quickboost continue to add superb detail sets to their growing catalog of items. For this review I will be looking at the exhaust detail set for the 1/48 Hasegawa Ki-44 II “Tojo” family of kits.


Hasegawa has released many different boxings of the Japanese WWII Shoki Fighter, and from what I see in my collection, this Quickboost set will work with any of the Ki-44 II kits.


The Quickboost exhaust stacks themselves are finely molded, and are very easily removed from the casting block. I find that using a razor saw is the easiest method, and after a little sanding, these great detail parts are ready to glue in place.


As you can see from the photo, the detail is far above the kit part that these replace. The exhaust well is deeper and more defined on the Quickboost replacement parts than the original kit part.

Review Author
Tim Hortman
Published on
November 29, 2010
Company
Quickboost
Scale
1/48
MSRP
$6.50

The folks at Quickboost continue to add superb detail sets to their growing catalog of items. For this review I will be looking at the Exhaust detail set for the 1/48 Hasegawa F1M2 “Pete” family of kits.


This superb detail set is designed to work with the 1/48 Hasegawa Mitsubishi F1M2 “Pete”. The “Pete” was a WWII Japanese reconnaissance floatplane. This biplane was inititally designed for reconnaissance, but was used as a bomber and fighter as well.


The Quickboost Exhaust parts are finely molded, and are very easily removed from the casting block. I find that using a razor saw is the easiest method, and after a little sanding, these great detail parts are ready to glue in place.