Fuselage

Soko J-22 Orao

Main gear and well - note door actuators

F4U-1 Corsair, Part 3 – The Finale

Finished model 07

J-15 Chinese Navy – Limited Edition

Image 8

Lockheed Martin F-35B Lightning II

Kit Wing Dihedral

B-52G Stratofortress "Gulf War" 25th Anniversary

Chassis

JASDF Patriot PAC-3 Launching Station

Finished Right Rear

Sturmgeschutze III Ausf.E - Smart Kit

Side view

'49 Mercury Wagon

Impressed into Service

Mercedes Typ 770K (W150) Tourenwagen

13

Beaufort Mk.1 – WWII British Dominions Air Force

Previous Next

Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Packaging

Messerschmitt Bf-110C/D Engine Bulkhead
Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/48
MSRP
$7.00

The new Cyberhobby Bf-110s are some of the finest versions of this famous aircraft but even they could use some resin to make them even better.

These little gems are molded in light grey resin without a bubble anywhere. The level of detail far exceeds what is in the kit. These parts are easy enough to add. Simply remove them and substitute them for parts K12 and K13. The only thing these need to make them outstanding is a good paint job. Granted they will be mostly hidden but I think that they add to the look of the finished model.

I like to upgrade cockpits and wheel wells so this set is perfect for me. So if you are like me you will ‘need’ these.

Highly recommended

Thanks to Quickboost and IPMS/USA for the review copy

You can obtain your copy from your local hobby shop or by contacting Quickboost at www.quickboost.net.

Packaging

Arado AR 196A Armament
Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/48
MSRP
$3.99

Quickboost has taken a shine to the Italeri Ar-196 kit. This makes either the fourth or fifth upgrade set for it. This time the emphasis is on the armament. Molded in light grey resin the parts feature great detail. This set has seven resin pieces with everything from the guns and barrels themselves to the mounts and ammo drums. The cooling fins on the gun barrels are especially nicely done. The ends are hollow and look great. The detail is much finer than that included in the kit and requires significantly less clean up than the plastic parts.

Highly recommended

Thanks to Quickboost and IPMS/USA for the review copy

You can obtain your copy from your local hobby shop or by contacting Quickboost at www.quickboost.net.

Packaging

Mc.200 Saetta Exhaust
Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/48
MSRP
$3.99

The exhausts on the Italeri Mc.200 are solid piece of plastic with little detail. Quickboost’s offering features deep hollowed exhaust stacks which only need to be removed and painted to bring them to life. The exhausts are direct replacements for the kit items.

Highly recommended

Thanks to Quickboost and IPMS/USA for the review copy

You can obtain your copy from your local hobby shop or by contacting Quickboost at www.quickboost.net.

Parts packaging

Messerschmitt Bf-109G-14 Exhaust
Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/12
MSRP
$5.50

The Academy kit is a nice kit but could benefit from some resin upgrades. Quickboost offers an easy way to upgrade the exhausts with this little set. The set is molded in light grey resin and contains two exhaust stubs. The ends are hollowed out and include the molded on weld seems. These are drop in replacements for the kit parts so adding them is easy.

Because of the size of the parts these will not fit the Hasegawa kit without some modification, but on the Academy kit they will fit perfectly. Just some paint and these will be ready to go.

Highly recommended

Thanks to Quickboost and IPMS/USA for the review copy

You can obtain your copy from your local hobby shop or by contacting Quickboost at www.quickboost.net.

Parts packaging

Henschel Hs-126 Exhaust
Review Author
Floyd S. Werner Jr.
Published on
Company
Quickboost
Scale
1/48
MSRP
$3.99

The ICM Hs-126 is a nice kit. The exhausts on the kit are just solid pieces of plastic. These little gems, molded perfectly in light grey resin, feature hollowed out ends that I would not be able to do on my own. There is no doubt these will add to the look. Simply remove them from the pour blocks and paint. A simple, yet effective, upgrade set for the Hs-126.

Highly recommended.

Thanks to Quickboost and IPMS/USA for the review copy

You can obtain your copy from your local hobby shop or by contacting Quickboost at www.quickboost.net.