Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
John Lyons
Published on
Company
Quickboost
Scale
1/72
MSRP
$5.95

History: The Junkers Ju 188 was a German Luftwaffe high-performance medium Tactical bomber/Reconnaissance aircraft built during World War II.

Review:

The quality of the casting is perfect and bubble free. The tips of the exhaust pipes are hollowed out for added realism. Most resin parts are likely to need more work on them than the more normal injection molded plastic parts that you may be used to. Why you ask, well Resin is a much harder material then the standard molded plastic in your kit. This is what gives it the fine details you are looking for. In some cases the greatest challenge can be cutting the part from the casting block without damaging it. I have found that it is better to cut away the bulk of the casting block, leaving just a small amount behind so that it can be trimmed away with a hobby knife.

Review Author
Roger Rasor
Published on
Company
Aviaeology
Scale
1/48
MSRP
$16.00

Aviaeology offers a variety of decal sets for model builders who build 1/72, 1/48 and 1/32 scale WWII Aircraft flown by Commonwealth nations. Among them are two sets to finish early Hawker Hurricanes. Set #AOD480007.2 provides markings for 1/48 scale Hurricanes in service during the Battle of Britain and beyond. Obviously, since it is part 2, there also is a part 1 that will be reviewed elsewhere on this site. This set, like the others, appears to be based on considerable research, and the fact that it is produced for Aviaelology by Zotz assures model builders of high print quality. Full instruction sheets are included that provide complete black & white left and right profiles and plan views for each aircraft. And, full color PDF images of the illustrations on the instruction sheets will be emailed from Aviaeology upon request.

Eight subjects are covered. They are:

Review Author
Gary Telecsan
Published on
Company
Master Model
Scale
1/72
MSRP
$9.00

This incredibly detailed and finely crafted set of replacement aerials for the Funk Gerate 220 SN-2 Liechtenstein radar has to be seen to be believed. My poor modeling skills simply do not do them justice. The first photo shows the package, and inside one finds 14 brass pieces, 5 for the horizontal portion and 9 for the vertical, which assemble into 4 aerials. There is one each extra piece for oopsies. The instructions are clear and simple. To get the best results, these must be assembled by soldering

Review Author
John Lyons
Published on
Company
Quickboost
Scale
1/32
MSRP
$6.95

History:

The Ilyushin Il-2 was a ground-attack aircraft (Sturmovik) in the Second World War, produced by the Soviet Union in very large numbers.

Review:

The resin is bubble free and perfectly formed. The tips of the pipes are hollowed out; they have a thinly formed edge for that realism you are looking for.

Most resin parts are likely to need more work on them than the more normal injection molded plastic parts that you may be used to. Why you ask, well Resin is a much harder material then the standard molded plastic in your kit. This is what gives it the fine details you are looking for.

In some cases the greatest challenge can be cutting the part from the casting block without damaging it. I have found that it is better to cut away the bulk of the casting block, leaving just a small amount behind so that it can be trimmed away with a hobby knife.

Review Author
David Goudie
Published on
Company
Wingnut Wings, Ltd
Scale
1/32
MSRP
$19.00

The boys from New Zealand have again moved forward with their line of World War I products. This time it is the release of a series of decals sheets intended for kits already on issue. These decal sheets are of the same quality as the kits from this manufacturer and are printed by Italian company, Cartograf. Cartograf is well known as a premier decal printer and these are no different. If you want something other than the kit supplied decals then any of these kit specific sets will suit your needs.

This specific set represents 5 different aircraft from JG1 “Flying Circus”, which was a mobile group of machines piloted by, ostensibly, the best pilots in the Imperial German Army Air Service (Luftstreitkrafte). The term “Flying Circus” rises from the colorful schemes of each pilot’s aircraft. This decal set contains markings for the following 5 pilots: