Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Mike Hinderliter
Published on
November 14, 2011
Company
Quickboost
Scale
1/72
MSRP
$4.95

Quickboost has added another resin aircraft accessory to their aircraft line. This time it is the tail cone and tail wheel to convert the Hasegawa Brewster Buffalo F-2A-2 into a Brewster Buffalo 339. It is up to their usual standards; molded in grey resin, smooth, seamless, and bubble-free. One thing of note is that they are really easy to remove from the mold block because of a nice perforation.

The Brewster Buffalo 339 was an export version of the United States Navy Buffalo F-2A. The 339 was modified from the naval version to have a lower rpm engine and a larger tail wheel and cone. It was sold to Finland, France and Britain to help bolster their aircraft at the start of World War 2.

Review Author
Mike Hinderliter
Published on
November 14, 2011
Company
Quickboost
Scale
1/72
MSRP
$4.95

Quickboost just keeps adding to their line of resin aircraft accessories. Another addition is for the Revell F-22 Raptor. It is up to their usual standards: molded in grey resin, smooth, seamless, and bubble-free. One thing of note is that they are really easy to remove from the mold block because of a nice perforation.

The control lever and throttle that come in the Revell kit look okay and would make an acceptable model. The Quickboost replacements really look a lot better when compared to the kit parts. They are very easy to install and they just fit right in. in 1/72, these parts are very small but it is a great relief to know that, if you just fed the carpet monster your kit parts, you are able to replace them. The Quickboost set comes with two sets of control levers and throttles just in case you want to do another kit or give the carpet monster another snack.

Review Author
Mike Hinderliter
Published on
November 14, 2011
Company
Quickboost
Scale
1/72
MSRP
$4.95

Quickboost just keeps adding to their line of resin aircraft accessories. The latest addition is for the Spitfire. This time they have put out the correct antenna for the top of your Spitfire instead of the usual straight stick that comes in so many kits. It is up to their usual standards: molded in grey resin, smooth, seamless, and bubble-free. One thing of note is that they are really easy to remove from the mold block because of a nice perforation, but still be careful because they are very small and delicate.

In addition to the little “nubs” at the top, the antenna has a recessed groove in the side. Having never seen a Spitfire up close, I don’t know if it’s 100% accurate, but it sure looks good!

This set comes with 3 antennas, which is nice because you can add one to the kit you’re working on and update a couple of other Spitfires you’ve built previously.

Review Author
Roger Carrano
Published on
November 13, 2011
Company
Eduard
Scale
1/35
MSRP
$21.75

Eduard has recently come out with a few new items for the Nashorn by AFV Club. This particular photo etch kit is plainly called “Nashorn” and it incorporates interior and exterior items to enhance the already fine kit which AFV Club released. The stock number for the AFV kit is AF35164.

This PE fret will enhance parts such as the floor, hinges on some of the stowage boxes, handles on the hatches, antenna mounts, small hold-down clamps for accessories and tools which are stowed on the outside of the vehicle, and newly formed boxes for tool storage. These features are all designed and made with the typical Eduard engineering found in all of their products which most definitely adds the finishing touch. All of the items included in this kit add subtle improvements, but when compared to an OOB assembly, the difference can be noticed.

Review Author
Rob Benson
Austin Smith
Published on
November 13, 2011
Company
Revell, Inc.
Scale
1/24
MSRP
$16.95

Looking at the Box

Austin (age 7): I think the kit looks pretty neat and stuff, awesome. I like the pictures on the sides. It was made in 2011 by Revell Snaptite.

Rob (actual age 53, behavioral age debatable) : The box is 9.5 x 6.75 x 4.5 inches and is lavishly illustrated. The Diablo is described as “a wild and fast mid-engine exotic sports car with four-wheel drive.” I wince at the thought of working on a 5.7 liter engine with 48 valves. I guess if you can afford one of these cars, you can afford a mechanic and the insurance.