Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Dick Montgomery
Published on
November 11, 2011
Company
Eduard
Scale
1/48
MSRP
$28.00

For those who wish to build a first class model of the Tornado, Eduard has some items that will make the interior of the Tornado come alive with detail and color. Eduard is offering an excellent set of photo etched parts to replace some of the molded cockpit detail found in the Hobby Boss Tornado kit, and the Eduard parts are “self-adhesive”. It is necessary to remove the molded detail on the instrument panel and side consoles of the Hobby Boss parts. While doing so goes against the grain for most modelers, rest assured that the appearance of the cockpit will be improved once the Eduard parts are installed.

Review Author
Rod Lees
Published on
November 9, 2011
Company
Fine Molds
Scale
1/48
MSRP
$66.00

First: Extreme thanks to FineMolds for having dared to finally provide an injection molded kit of this famous weapon. If you have never built a FineMolds model, please understand that they are one of the top-notch short-run companies out there. The first FineMolds model I built was their all-resin and metal “Tony” kit, back in 1992; it heralded in all-resin kits for me, fit great, and cost (at the time) about $100. A very “Princely” price, but it lasted for 15 years after I built it. Not bad for a model to survive three military moves with the lowest-bidder moving companies… Enough talk, on to the “Okha”!

Review Author
Don Barry
Published on
November 9, 2011
Company
Dragon Models
Scale
1/35
MSRP
$79.95

The kit consists of over 400 parts on 15 sprues (7 containing individual track links), 1 upper hull, 1 small photo-etched fret, and 1 sprue of clear parts. The instructions are the exploded view type, with part numbers and sprue letters called out, consisting of 15 assembly steps on a single, multi-fold sheet. Painting details are shown throughout.

Review Author
Dick Montgomery
Published on
November 9, 2011
Company
Quickboost
Scale
1/48
MSRP
$8.20

The Parts:

Quickboost is releasing products similar to this item for an ever-widening range of aircraft, and each of these products that I’ve seen lives up to the high standards of quality for which Quickboost is known. Included in this offering are four individual prop blades, two prop hubs into which the blades are fitted, and two spinners. Of course, also included is the “tool”, which is a solid block of resin with a specially designed layout that holds the prop blades and hubs in correct alignment for assembly.

Assembly:

Assembly is straightforward and can be accomplished after painting. That makes life easier for the builder. One simply places a “hub” in the receiving bay within the “tool”, places a prop on the “tool”, and glues it into the hub. No fuss, no muss, and perfect alignment every time!

Conclusion:

Review Author
Bill Kluge
Published on
September 20, 2021
Company
Fine Molds
Scale
1/350
MSRP
$129.95

The Ship

When the Japanese destroyers of the Fubuki class first appeared in 1928, they took the rest of the world’s sea powers completely by surprise, and their combination of large size, high speed and heavy firepower set the standard for other navies to follow for the next decade. Commissioned in 1930, HIJMS Ayanami was the lead ship of an improved Fubuki “Special Type” with its main armament of six 5” guns capable of 75º of elevation, in theory making her the first warship in the world with main guns capable of taking on surface vessels and aircraft. However, her fire control was inadequate to the anti-aircraft task, and these weapons were never effective in that role.