Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Tom Pope
Published on
October 10, 2021
Company
Academy Models
Scale
1/48
MSRP
$69.00

Introduction

My thanks go out to MRC-Academy for providing this up-dated kit for review and to IPMS USA for letting me do the review. My apologies to Academy & IPMS for this review taking so long - I hate it when my job gets in the way of my hobbies but I had some issues at work for a while there.

In the Box

The box contains 7 gray and 1 clear sprues (including the new sprue "S" with many new detail parts), a nicely scaled, turned brass air data tube, instructions, a full-color (11.75" x 16.5") poster depicting painting and marking placement and a superb new decal sheet by Cartograf. There are about 287 parts but you won't use 70 of them so you'll have a good set of extra bits when you're done.

The instructions are very clear and well organized. There are still a couple typos along the way so pay attention (the lever arms that rotate the pylons when the wings sweep in the right wing in step 6 should be labeled #37 vs. # 36 as indicated.

Review Author
John Lyons
Published on
July 14, 2011
Company
Werners Wings
Scale
1/35
MSRP
$25.00

Werner's Wings has released a 5-piece resin set to transform the 1/35 Academy AH-1W NTS into the latest version flying in Afghanistan with turned exhausts to provide a lower heat signature. The parts look very clean and the edges are nicely formed with crisp edges.

The set includes the exhaust housing and outlets, 2 inserts for inside the exhaust outlets, the inner engine bulkhead, and a cover for the tail rotor shaft.

It also comes with a detailed instruction sheet showing you how to install the parts.

It requires that you cut part of old exhaust attached to the fuselage and replace it with the resin parts. Also warns about cutting the area around the driveshaft cover, recommends that you cut the exhaust area first then measure area for the driveshaft cover.

Because the parts have some weight to them you will have to drill out some of the resin from the front of the exhaust. This will help balance the aircraft so it sits correctly.

Review Author
Phil Peterson
Published on
July 14, 2011
Company
SuperScale International
Scale
1/72
MSRP
$12.00

The B-17 is one of my all-time favorite aircraft and with the new Revell kit out in 1/72nd scale I was very excited to get this sheet of decals to give me some additional options when I acquire the kit.

I have used SSI decals before and they have always performed well for me. This sheet is printed in perfect registration and gives full markings for two B-17Gs including stencils and stars and bars for both aircraft. The only flaw I can see is the nose art on both planes lacks detail.

The aircraft depicted are:

Book Author(s)
Gordon Wiliamson
Review Author
Phil Peterson
Published on
July 14, 2011
Company
Osprey Publishing
MSRP
$17.95

While I have looked through a few of the "Duel" series in the book store, this is the first one I have actually read. Looks like it won't be the last one.

The book is in the typical Osprey size but there are 80 pages in it. One thing I like about this series is besides some of the technical description of the combatants, it also gives you over 30 pages of combat stories and details which definitely make you want to pull out the old Airfix Vosper MTB and/or the Revell E-Boat and start building.

Review Author
Pablo Bauleo
Published on
July 14, 2011
Company
Alpha Precision Abrasives Inc.
MSRP
$6.99

Alpha Precision Abrasives is a manufacturer of industrial abrasives. It also has selection of abrasive tools for the hobbyist. Master Detail is packaging a selection of Alpha Precision Abrasives products into an introductory package. The package includes

  • 1/8-inch Sanding Files (100/180; 120/240 and 240/320 grit)
  • 3 Plastic Sanding Needles (150, 240 and 320 grit)
  • Micro Finish Cloth Abrasive Sheet (3200, 3600, 4000, 6000, 8000 and 12,000)
  • Abrasive Cleaning Disk

The sanding files are really nice. They bend enough as to follow curved parts without damaging or deforming them, while still have enough ‘hardness’ as to get the sanding job done. You can clean them and re-use them several times (see below). They are color coded in each side for a different grid, however the 100/180 are both white, making difficult to know which grit is the one being used.