Review Author
Michael Reeves
Published on
July 5, 2022
Company
ICM
Scale
1/35
MSRP
$59.19

ICM is one of many model companies based in the Ukraine that have been affected by the recent war with Russia. Based in Kyiv, the company has been active as of late in creating and releasing new products and defying the challenges they face. This kit is a rebox with new parts for the kit released back in 2021. Let’s take a look…

What’s Inside the Box

The kit comes as the standard ICM kit does—with a colorful box top that slides off of an enclosed brown cardboard box. Parts were packaged well and details were crisp with no flash to speak of.

Review Author
David Wrinkle
Published on
July 5, 2022
Company
Brengun
MSRP
$8.70

Upfront, I want to thank Brengun for providing outstanding aftermarket bits for our beloved model kits, and to IPMS USA a big thank you for allowing me to review the Brengun resin replacement wheels. Today’s review represents resin replacement for any 1/72 SBD dauntless kits. This set includes two (2) pair of resin weighted wheels each pair having a different pattern along with one pair of photo-etch wheel covers. As always with this type of model detail set, check your resources for the correct pattern to use on your kit.

I’ve included comparison photos with the Flyhawk 1/72 Dauntless kit. Like other resin wheels you will most likely have to drill out the hole in the wheels to match the diameter of the kit’s axle size. For a very reasonable amount of money, Brengun provides you with a very nicely set of detailed wheels for any Dauntless model.

Review Author
David Wrinkle
Published on
July 5, 2022
Company
Scale Aircraft Conversions
Scale
1/72
MSRP
$12.95

Upfront, I want to thank Scale Aircraft Conversions for providing outstanding aftermarket bits for our beloved model kits, and to IPMS USA a big thank you for allowing me to review the Scale Aircraft Conversions (SAC) metal gear.  Today’s review represents a direct drop-in replacement for the 1/72 Hasegawa Avenger TDM/TDF line of kits. This set includes five (5) parts to include: both main gear legs and their accompanying pistons, and the tail wheel for the Hasegawa kit.

SAC specializes in white metal replacement landing gear parts.  In my humble opinion, their landing gear is the only way to go to both provide strength for larger heavier kits and dealing with spindly, fiddly smaller kit gear legs. The SAC gear is far more forgiving than plastic gear legs and has the wonderful ability to be gently adjusted, unlike their polystyrene relatives.

Review Author
Chris Gibson
Published on
July 5, 2022
Company
Hobby Boss
Scale
1/18
MSRP
$120.00

Brief History

The Messerschmitt Bf109 is probably one of the most well-known WW2 fighter planes ever made. Also the most prolific at 35000 produced. They were produced well into the 1960s by the Spanish Air Force and by Czechoslovakia. It was a plane developed in1934 by Willy Messerschmitt to a Luftwaffe specification for a high performance single seat fighter. The Bf109 was, in essence, the smallest airframe that could be wrapped around the most powerful inline engine and still carry a useful armament load. The first prototype flew in October of 1935, powered by a British Rolls-Royce engine, the Jumo engine not being ready at that time. The Jumo powered Bf109B entered service in 1937 and was used in the Spanish Civil War.

Review Author
Mr. Paul Dunham
Published on
July 5, 2022
Company
Tamiya
Scale
1/35
MSRP
$21.00

Tamiya’s new 1/35th scale figure kit “U.S. Infantry Scout Set” includes plastic parts for making five U.S. army WWII infantry figures. The kit comes in a 10” by 6” by 1 1/2” top-opening box. The box contains four sprues of plastic parts, a double-sided instruction sheet, and water-slide decals. Sprue CA and sprue CB provide the weapons and accessories. The weapons included are: an M1918 BAR with choice of open or closed bipod, an M1 carbine, two M1 garand rifles, an M1A1 thompson, two bayonets, three knives, and six hand grenades. There are enough entrenching tools, canteens, and helmets for each figure. The helmets are molded with the straps pulled up over the brims. Two of the helmets have mesh coverings molded on. Sprues X and Z provide the parts for the meaty bits and figure-specific accessories. The instructions provide a list of recommended Tamiya paints, assembly instructions, and a description of the ranks depicted by the markings on the decal sheet.