Book Author(s)
Yefim Gordon and Dmitriy Komissarov
Review Author
Michael Novosad
Published on
August 25, 2019
Company
Crecy Publishing, Ltd.
MSRP
$64.95

Introduction

(from the Specialty Press website)

Designed as a mass-produced and relatively cheap light tactical fighter, the MiG-29 first flew on October 6, 1977. After extensive flight testing, it entered production in 1982 and deliveries to the Soviet Air Force began in 1983. In addition to its main counter-air role, the aircraft had a useful air-to-ground capability, carrying free-fall bombs and unguided rockets. From the outset the MiG-29 had been steadily developed beyond the fourth generation with changes to the airframe, avionics and weapons systems and new variants were produced in the early 2000s.

Review Author
John Noack
Published on
August 25, 2019
Company
UMM-USA
MSRP
$5.76

John Vojtech, the genius behind UMM-USA, gave us a nice collection of tools at the Chattanooga National Convention this year. I have the privilege of reviewing a handful of them and here’s #1.

If you’ve never used a UMM product (and why not?), they are exquisitely manufactured. This particular tool is an extremely narrow (0.8mm/0.031 inch) chisel mounted in a sturdy, contoured plastic handle. The blade tip is a grooved, wedge shape.

What’s it good for? Removing minute amounts of material in a controlled fashion – ejector pins, molded on detail that’s to be replaced, flash removal, scribing detail into small parts, etc. I have been attempting to do this with an X-Acto knife all along, now that I have this tool I can actually maneuver the cutting surface into the immediate area rather than trying to cut at multiple angles and clean up the resulting carnage <g>.

Review Author
John Noack
Published on
August 25, 2019
Company
UMM-USA
MSRP
$6.95

If you read my review of UMM’s 0.8mm Beveled Tip Chisel, you’ll have a general idea of the quality of these fine tools. That being said, UMM offers a wide variety of chisel shapes – 14 different tip shapes and sizes by my latest count. UMM 35 is a 2.5mm (0.10 inch) chisel blade affixed to a high quality plastic handle. The tip on this tool is elliptical, and while it will perform a wide variety of tasks (ejector pin removal, opening intakes, etc.) one unique use for the tool is for figure modelers to create or emphasize clothing folds. My figures are cartoonish and I’ll probably never get to that point but the tool is perfectly sized and shaped for my purposes.

Our thanks go out again to UMM-USA and John Vojtech for his generous support to the review team here.

Review Author
David Wrinkle
Published on
August 24, 2019
Company
Brengun
Scale
1/72
MSRP
$9.60

I was intrigued by this model offered by Brengun that would be a great piece to add with your Japanese ground-based aircraft display base. My hopes are that I will eventually have an opportunity to try the 1/48 scale version of this accessory.

Typical with Brengun’s other releases, they provide the end user with some extremely nicely cast parts molded in a darkish grey resin. If there were any imperfections, they were not noticeable to my eye. I found the parts delicate buy not fragile. The resin was reasonably pliable making removal from the pour stubs easily achievable with a little patience. I can’t overstress to double, triple, and quadruple check the instructions before removing the parts. I had a small oops where I removed and discarded a small portion of the support frame. Thankfully I was able to recover my error with a scratch-built pump mount.

Review Author
Tom Choy
Published on
August 24, 2019
Company
Twobobs Aviation Graphics
Scale
1/72
MSRP
$15.00

Between April to October of 2018, several F-15Es from the 494th Expeditionary Fighter Squadron (the "Panthers") deployed to an undisclosed location in the Middle East to support Coalition Joint Task Force Operation Inherent Resolve, tasked with striking Islamic State targets in Iraq and Syria. While deployed, the Panthers completed nearly 2,000 missions, over 10,000 flying hours, employing more than 500 precision-guided munitions in support of US Central Command operations. On their return to Lakenheath at the end of the deployment, the aircraft were seen sporting some very striking nose art and mission markings.

Since 2001, TwoBobs decals has built up a reputation for high-quality, well-researched and detailed decal sheets with a focus on modern US aircraft. This decal sheet focuses on some of the more prominent Panthers from the OIR deployment.

The airframes on this sheet are: