Welcome to the IPMS/USA Reviews site!

Introduction: The primary organization of the IPMS/USA Review website is by IPMS/USA National Contest Class. Within each Class there are sub-menus by kits, decals, books, etc. The Miscellaneous Class is for items that are not class specific or that cross two or more classes.

IPMS/USA Members: We encourage you to submit reviews, both here and to the Journal. To volunteer for membership in the IPMS/USA "Reviewers Corps" and submit your own reviews, please read the Guidelines For Submitting Product Reviews.

Manufacturers, publishers, and other industry members: IPMS/USA is pleased to offer your company the opportunity for product reviews. All product reviews are performed by IPMS/USA members, and are posted in the publicly-accessible section of our website. With very few exceptions, we perform full build reviews of new kit releases, aftermarket products, and supplies. If you would care to provide product samples for review, please contact John Noack, IPMS/USA 1st VP.

To learn more about IPMS/USA, please see our About Us page.

Review Author
Jim Pearsall
Published on
July 20, 2011
Company
Quickboost
Scale
1/72
MSRP
$4.95

A while back I built the Zvezda 1/72 Mi-24 Hind. I got the opportunity to do this review and grabbed it, as I wouldn’t have to build the entire kit just to add the nose guns

The package contains two guns. The kit gives options of two different guns in the nose turret. The one I used is the Yak-B 4 barrel Gatling-type gun, 12.7 mm. The other is a twin-barrel gun the G-Sh-30, a 30 mm weapon. The 12.7mm has been phased out, and the 30 mm is preferred, as it has more punch, particularly on light armored targets.

The G-Sh-30 is definitely superior to the kit parts, as the kit gun comes in 2 parts, so you have to deal with a seam. The QB part has slightly finer detail, which is still hard to see in 1/72.

The Yak-B looked quite a bit like the kit part, and fit into the turret nicely. The only outstanding difference was that the hump on the kit part is a recess on the resin part.

Review Author
Roger Rasor
Published on
July 20, 2011
Company
Quickboost
Scale
1/32
MSRP
$5.99

While a lot of attention has been focuses on aftermarket offerings for Tamiya’s growing line of 1/32 Spitfire kits, Quickboost has release a set of resin gun barrels that are designed to replace those found in Hasegawa Spitfire kits. They are direct replacements for kit parts #CC3 and #CC16, and the detail is crisp and delicate. The castings, like all other Quickboost resin parts are blemish free and offer detail superior to that found in the kit parts. The gun barrels provide hollow ends, fine recessed details and delicate rivets. No clean up is required and there are no pinholes to worry about. They are easily removed from the casting block with a #11 blade and should be attached with super glue or epoxy cement.

This Detail Set is highly recommended to anyone who wants to enhance the detail of a 1/32 Spitfire built from a Hasegawa kit.

My thanks to IPMS/USA, Quickboost.net and Aires Hobby Models for the opportunity to review this detail set.

Review Author
John Lyons
Published on
July 20, 2011
Company
Quickboost
Scale
1/72
MSRP
$6.95

History:

The Bf 110 served with success in the early campaigns, the Polish, Norwegian and Battle of France. The Bf 110's lack of agility in the air was its primary weakness. This flaw was exposed during the Battle of Britain, when some Bf 110-equipped units were withdrawn from the battle after very heavy losses and redeployed as night fighters, a role to which the aircraft was well suited.

Quickboost has some of the best resin parts I have seen. For a 1/72 scale part the edges are sharp and the details are clearly defined. This will be a nice upgrade to the Airfix kit.

I would like to thank Quickboost.net, Aires Hobby Models and IPMS/USA for the opportunity to conduct this review.

Review Author
Jim Pearsall
Published on
May 24, 2022
Company
Minicraft Model Kits
Scale
1/144
MSRP
$10.00

The Aircraft

The Tempest was a follow-on for the Hawker Hurricane and Typhoon. Through the Typhoon and Tempest development, Hawkers had problems with several new systems, and the Air Ministers were ready to scrap the new aircraft programs. One of the people who successfully argued for their retention and one of the problem solvers was Roland P. Beamont.

The resulting aircraft was very fast, quite maneuverable, and a success against the Luftwaffe. But its biggest use in late World War II was against V-1 flying bombs. The Tempest had the speed and toughness to fly alongside a V-1 and tap the wing tip of the missile. This would cause the gyros in the navigation computer to tumble, and the V-1 would crash well short of its target. Good for London, not so good for those living along the flight corridor. Tempest Wing (#150) accounted for 638 V-1s.

Review Author
John Lyons
Published on
July 20, 2011
Company
Lifelike Decals
Scale
1/48
MSRP
$16.50

Lifelike Decals are some of the best designed and clearly printed decals on the market today. This set has a combination of Fw190A/F examples for four different Focke Wulf aircraft.

This decal set provides markings for:

  • Fw 190A-3, 2/EJG2. West, Yellow 28, Cazaux AB, France, 1942
  • Fw 190A-4, 9./JG 2, Yellow 4, Vannes AB, France, Feb 1943, as flown by Oblt Siefried Schnell
  • Fw 190A-4, Commander JG 101, Triple Chevron, Pau AB, France, Summer 1944, as flown by Major Walter Nowotny
  • Fw 190F-8, I./SG 4, Yellow 7, Wenden AB, Germany, Sep 1944

The color profile sheets show a Side, top and bottom views of each aircraft.

This set also comes with “swastikas” (Thank you Lifelike for including them on the sheet and not wasting our time with lame politically correct nonsense) and the national markings. You also get a nice set of stencils.