Dave Morrissette
Reviews By Author
|
WWII USMC Seated Fighter Pilot Gregory "Pappy" BoyingtonPublished:
Ultracast has issued a figure than can be used in Tamiya's 1/32 F4U-1a Corsair and they picked one of my favorite subject, Pappy Boyington. The kit comes in seven well cast tan resin pieces- two arms, two legs, torso, head and chin strap. The castings are excellent with minimal to no mold lines. And the sculpt is by Mike Good and is superb. I started the build by freeing the pasts from the casting blocks with a razor saw. A few scrapes with the back of a knife and the seams were gone. I added the arms and the legs and had small gaps. I used Squadron white putty to fill in the seams and smoothed with a lacquer thinner. Once dry, I primer with Alclad gray primer. I started with the flesh which is only the face. I have started using Scale 75 paints and really like them.… more |
|
F4F Wildcat Landing GearPublished:
Tamiya’s Wildcat has been around for a while and it is an excellent kit. Scale Aircraft Conversion has produced a set of metal landing gear to use on the kit. The set includes all the gear parts including the portions up inside the nose. A new tail wheel is also included. The metal parts are well made and are drop in replacements for the kits parts, but are made of metal. The metal is stiff but retains its malleability. Some cleanup will be needed to free it from the molding sprues and I recommend a razor saw for this work. Several modelers have asked me “why metal gear”? I agree, that this kit is not particularly heavy and my answer is twofold. First, have you ever lost a part? I have and while you can get the parts for most kits, getting these sturdier parts is much easier… more |
|
Ventura’s in Canada 4Post WWII RCAF- B&G Trainers and Target TugsPublished:
Aviaeology out of Canada produces decals specific to many Canadian themed subjects. The research going into these decals is second to none. This set includes markings for four different aircraft in a variety of schemes and is meant for Revell’s beautiful 1/48 scale Ventura kit (but they are available in other scales too. Here’s a list of the planes represented:
|
|
T-45C Goshawk DecalsPublished:
Caracal Models has scaled down their 1/48 T-45 series into 1/72, which can fit the Testor’s/Italeri version of the kit. The decal set comes with five options, which are:
The set comes with a multipage full color booklet with left and right profile views of all five aircraft in their orange and white training schemes. Noted where needed are other color callouts, with one plane actually being insignia red. There are great notations on… more |
|
F-15C/D Lakenheath EaglesPublished:
Lakenheath is host to the largest deployment of United States Air Force personnel in the United Kingdom and one of the most important planes in their inventory is the F-15 Eagle. The Eagle is becoming a venerable plane having first debuted in 1976 but is still very capable and Caracal has honored this by producing a sheet for four F-15C’s all with kills and one F-15D all from Lakenheath. The set comes an excellent color cover showing all four options. Left and right profile shots of all four options are also included with stencil and markings placement. Color call outs are also included. There is also a note included that all aircraft depicted have had the MSIP II conversion so that is why the Great Wall Hobby kit is the recommended kit over the Hasegawa/Tamiya/Monogram… more |
|
USAF T-6G TexanPublished:
Kittyhawks 1/32 scale model of the T-6 Texan was very well received and the buildup models with the kit decals look great. The T-6 was widely used as a trainer and over 15,000 were built. Caracal Models has released a set of excellent markings which depict the T-6 as USAF trainers from the 1950’s. The markings cover:
Both planes are FS33538 Chrome yellow overall and are a nice change from the kit markings. Inside the package, there is a folded booklet of full color instructions showing all the needed plane views and profiles for each plane with decal placement and color call outs (chrome yellow and black). A standard size decal sheet is included and is… more |
|
C-45 Expeditor Part 2Published:
Caracal Models second release for the ICM 1/48 C-45 Expeditor covers this plane in service outside the United States with a total of five sets of markings. Inside the package, there is a seven page booklet which has full profiles of each plane (left and right as well as top and bottom), a page of color call outs and the cover showing all five variations. The five options are:
A standard size decal sheet is included which is printed… more |
|
PBY-5A Undercarriage Detail SetPublished:
Revell’s PBY-5A Catalina has been around for 20 years now and I have seen quite a few built and it looks large and impressive when finished. The kit comes in two style- the “-5” who has no wheel wells and the “-5A” which does. Eduard has released sets for the PBY-5A which allow improvements to the entire airframe. This set (#48825) addresses the wheel bays which are only present in the “-5A” model and cannot be used on the initial “-5” release. This set comes with one large photoetch fret of over 50 pieces and upgrades both main gear bays as well as the nose gear wheel well and the landing gear itself. Preparation is required in the main gear bay by removing the two plastic ridges and grinding them smooth. No worries about scratches as it will be covered but it does need to be… more |
|
F-16C "Florida Makos" 482FW FlagshipPublished:
The F-16 Falcon has been around for quite a few years now and it never ceases to amaze me just how many new and interesting ways they have found to mark it. Caracal Models has produced decals for one very interesting and cool set of markings. This sheet provides markings for the specially decorated 2014 flagship F-16C (87-0247) belonging to the 482FW based at Homestead AFB. Complete markings for the spectacular shark decoration and stenciling is provided on the decal sheet. The toothy mouth even sits next to the intake! Inside the package, you get an excellent reference-sheet indicating just which F-16C to use (Block 30 with GE Engine and a MCID big mouth intake), color call-outs and stencil locations, and the web site for location of the masking templates if you might prefer… more |
|
MHU-12 Munition TrailerPublished:
Videoaviation out of Italy is one we don't often see here in the US. But I can tell you that any modeler with an interest in aviation modeling needs to look at their suite and wonderful selection of products. The item for review in this case is a 1/32 MHU-12 munitions handling trailer, used to transport munitions between the storage areas and the flight line for the US and many other forces. It has a 5,000 pound capacity and can accommodate a wide variety of munitions. The kit is beautifully cast in 66 resin parts with parts for two different versions in the box; one (yellow) early with tires and towbar, one (green) late with tires and towbar plus decals. The kit can be configured many different ways based on what munitions would be being hauled. I elected to do the late… more |